3M™ AP2-305 Wall Mounted Water Filtration System (DIY Self-Installing Diverter) [Original Licensed]
- Filtration precision: 0.5 microns
- Effective filtered water volume: 800 gallons (3,000 liters)* * The filter element should be replaced when the water flow rate slows down. It is recommended to replace it every 6 to 9 months, but it also depends on the water consumption and water quality. The maximum life of the filter element is 12 moon.
- Flow: 0.5 gal/min (1.9 liter/min)
- Applicable water temperature: 4.4-38 degrees Celsius
Purchase Exceed $500 EnjoyFree ShippingGo Store
3M™ AP2-305 Water Filtration System (DIY Self Install Diverter). Zinc plate surface installation, install a simple diverter directly on the original faucet, avoiding the need to connect an independent faucet through the zinc plate opening. Effectively filter lead, rust, residual chlorine, odor, sediment and Cryptosporidium
- The system adopts advanced multi-functional design, one filter element can achieve multiple filtration performances
- Unique quick-change filter element design, convenient and simple
- Patented built-in bypass design, no need to turn off the water source when replacing the filter element
- Fully sealed filter element design, clean and hygienic
- Temperature range: 4.4-38°C
- Flow: 1.9 L/min
- Working pH range: 5.5~9.5
- Rated service life: 3,000 liters
- System Dimensions: 27cm (H) x 7.4cm (W) x 6.9cm (D)
- 3M™ AP2-305 Water Filtration System: 1 set
1. Items sold are non-refundable.
2. The products are supplied by Total Nutrition Center Limited
3. If in case of any dispute, Total Nutrition Center Limited and ESD Services Ltd. reserve the right of final decision.
1. Free local delivery service will be provided upon transaction amount of Total Nutrition Center Limited products of HK$500. For spending less than HKD$500, HKD$30 delivery fee will be charged.
2. We will arrange the shipment within 3 working days after the order is confirmed.
3. Please note that the delivery time will be affected by statutory holidays, natural disasters, traffic or the weather.
4. All order confirmations are subject to stock availability. In the event of the unavailability of the requested products, ESD Services Ltd. has the right to reject the order and notify customers by phone or email before delivery for rearrangements.
1. The quality assurance for products should have at least 12 months validity from the date of receipt by the customer.
1. Customers are responsible to check the condition of goods received at the time of delivery. Once confirmed, no replacement is accepted.
2. Products shall be kept in the original package with good conditions for return or exchange. Products that has been worn, used, or altered will not be accepted for return or exchange.
3. If any other defective or missing item is found, customers are required to keep the original receipt and contact ESDlife Customer Service Department via the below channels within 3 days from the date of delivery.